Playing with a gamepad did not work: all six move_* actions had no joypad
event at all, so a pad could yaw/pitch/roll/turbo but could not translate.
Nothing caught it because every action existed and the game booted fine —
no assertion checked that an action is reachable on *both* devices.
Controller layout, on the 6DOF convention (left stick aims, right stick
translates), using all six of the pad's analog axes for the ship's six
degrees of freedom:
left stick yaw + pitch right stick strafe + vertical
LB / RB roll RT / LT forward / back
L3 turbo R3 ball camera
Input is now read with Input.get_axis instead of is_action_pressed, so
triggers and sticks are proportional. Keyboard values are unchanged.
Three rotation bugs found by measuring a real Ship rather than reading the
code:
- apply_torque() is world-space and the torque was never rotated into the
hull's frame (unlike thrust, which uses -ship_basis.z). Roll input became
pitch after a 90 degree turn and inverted at 180, so the controls were
correct flying up-field and backwards flying back.
- ship.tscn's inertia is Vector3(7, 1, 7) but a flat torque was applied to
every axis, giving yaw 7x the angular acceleration of pitch and roll
(172 deg/s vs 52). Torque is now scaled per-axis by inertia, so
rotation_acceleration means rad/s^2 and all three axes match. Yaw is
unchanged.
- pitch_down pitched the nose UP: get_axis's arguments were reversed, so
the I/K keys and the stick each did the opposite of their label.
Menus were unusable on a pad for a separate reason: Godot 4.7 gives
ui_up/down/left/right joypad events by default but leaves ui_accept and
ui_cancel with none (verified against a pristine project), so a controller
could move the highlight and never press anything. A confirms and B goes
back. Gameplay exits on a new leave_gameplay action (Escape / Start) rather
than ui_cancel, so carrying B for menus cannot abandon a live match.
Bindings for both devices are rebindable in Settings -> Controls, persisted
to user://input.cfg — a separate file from settings.cfg because
VideoSettings.save() rewrites that file wholesale and would drop any
section it does not know about. project.godot stays the source of truth for
defaults; overrides are only ever a delta on top of a boot-time snapshot.
Verified: 268 unit tests, the ENet integration gate, and a 16-sample
before/after comparison of networked prediction residuals showing the
physics change does not regress them (median 0.083m -> 0.065m).
Note for follow-up: every policy in Game/bots/ was trained against the old
sluggish, world-axis rotation and will over-rotate until retrained.
Lands the non-networked Phase 0 tasks from multiplayer-todo.md (ship/camera/
arena refactors, sim constants, background FPS handling) plus a first pass
at exposing graphics/performance settings (presets, resolution scaling,
vsync, FPS cap, perf overlay) and a GPU profiling harness for the
real-hardware follow-up in task 0.15b.
Josh Creek