mirror of
https://github.com/jcreek/CosmicClash.git
synced 2026-09-10 16:04:04 +00:00
866efa0d9b96963f4a01a69f6492f021b5dbbdac
11 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
866efa0d9b |
fix(multiplayer): server no longer rate-limits a backlog it caused itself
Closes task 5.10's three recording gaps, and the gap-closing found a real input-loss bug. Replay log: a failed write now ends the log permanently instead of desyncing every later record's framing; close() is called from _exit_tree with a summary, since the RefCounted destructor closes it implicitly but never says whether the log is complete; rejected packets are recorded with their reason in the kind byte (framing unchanged, FORMAT_VERSION 2 so "no rejects" differs from "this build never recorded them"). Recording is capped at 8 per peer per window - uncapped, the diagnostic is a remote disk-fill amplifier, since the attacker picks the packet rate. Uncapped totals live on MatchSim and survive the peer's disconnect. The bug: a 2s host stall has the client sending at 60Hz throughout, and ENet delivers that whole backlog in the first window after resume - 70 of an honest client's packets rejected as "rate limit exceeded". Redundancy does not cover it, because the dropped packets are contiguous: 0 of 70 rescued, and 82 of 923 sequences (8.88%, ~1.4s of input) never reached the server, against 0.00% with no stall. Every prediction gate passed. Fixed by granting each already-tracked peer a capped, two-window packet grace when the server detects its own wall-clock stall. Rate-limit rejects 70 -> 0, sequences missing 8.88% -> 0.00%, seq-guard rejects 9 -> 0. Controls on the unfixed build lost 4.34/7.52/7.86%. All three abuse roles still disconnect and no flood induced a stall, so the grace cannot be farmed. Also corrects an earlier wrong conclusion: the reviewer's free-flight p95 0.688 is real and reproduces on two processes with 0.0% snapshot loss. The plain --role=client drive fails the 0.5 free-flight bound in 3 of 8 runs because that drive is mostly a contact test - the harness comment already said so - leaving a cohort as small as 12 samples. Near-surface error is genuinely several times open-air error, so the calibrated bound now belongs to --exercise-free-flight alone and the plain role asserts the always-well-sampled all-cohort percentiles at 1.2/2.0, printing the free-flight numbers as reported-not-asserted. 6/6 plain runs pass where 3/7 failed; tightening to 0.3 still fails. tools/replay_dump.gd reads a log back: counts by kind, plus how much of the input sequence stream reached the server once redundancy is counted. |
||
|
|
7a1668c902 |
fix(multiplayer): second adversarial review - Esc, stranded clients, clock
A second adversarial review (this one able to RUN things, unlike the first) reproduced five defects. Fixing the critical and high ones. CRITICAL - Esc no longer left a networked match, and a client whose server vanished was stranded forever. Two independent bugs composing: _unhandled_input (added for spectator target cycling) overrode GameMode._unhandled_input and returned early for every non-spectator without ever calling super(), silently killing ui_cancel -> main menu; and NetworkedMatch never connected NetworkManager.disconnected_from_ server the way lobby.gd does. Measured: a client whose host exited emitted 7,235 engine errors in ~18s and only left because a test timer fired. Now 1 benign teardown error, and it returns to the main menu. HIGH - the match clock lost up to 3 seconds of regulation per goal. _on_goal_registered extended end_tick by the celebration only (resume_tick - goal_tick) and never by the 180-tick kickoff countdown that follows it, while _update_clock derived remaining time from the current tick regardless of _clock_running - so regulation drained during every stoppage. Measured 660 PLAYING ticks for a 14s match against 840 expected: exactly one WARMUP lost. The HUD also opened at 0:17 for a 14s match because the initial arm folded WARMUP into end_tick. Replaced the per-goal arithmetic with bank-and-rebase: entering any non-live state banks the remaining ticks, leaving it rebases end_tick off the banked value. That covers celebration and countdown together and cannot drift, since nothing has to predict how long a stoppage will be. clock_state and match_bootstrap now carry remaining_ticks, which is authoritative whenever the clock is stopped. Verified with the reviewer's own metric: 840 PLAYING ticks for a 14s match, exactly. MEDIUM - clients never froze at FULL_TIME/RESULTS. The freeze handling sat inside `if multiplayer.is_server()`, so a local player flew around for the whole 8s results screen while every other peer saw their ship parked. Not fixed, and now demonstrated rather than merely suspected: - The 30s slot reservation is keyed on display NAME, so a stranger can take a departed player's ship and the real player is then locked out (reproduced). Worse than first thought: MatchNet.local_player_name defaults to "Player" and uniqueness is never enforced, so collisions are the common case, not an attack setup. Needs a real identity token; §6.2 step 1 reserves auth_ticket for Phase 7. - §6.3's "late joiner takes the slot at the next kickoff" is unimplemented - _is_spectator is assigned once and never revisited - while the server logs that it happened. - Replay log still ignores store_* return values, never records malformed/rejected inputs, and close() has no caller. - --role=host-disconnect grades the reconnecting client on ~1s of life before the host quits, and never asserts the client owns _my_slot. Regression: 87 unit tests; free-flight LAN; transition gate 0.00%; goal cycle; spectator; disconnect and reconnect; full match to RESULTS. |
||
|
|
b5e9dff33c |
fix(multiplayer): Phase 5 adversarial review fixes - reconnect, spectators
An adversarial review found five real defects in the Phase 5 lifecycle
work. Two were critical and both were verified against controls.
CRITICAL - a reconnecting client silently became a spectator.
_try_reclaim_slot() swapped slot.peer_id, but MatchSim caches the last
match_config and replays THAT to whoever asks. A reconnecting client in
a fresh process requested config, received the pre-disconnect peer-id
array, could not find itself, left _my_slot null and fell through to the
spectator path - no ship, no input, for the rest of the match. The
evidence was already in my own disconnect-test logs ("no slot for this
peer - spectating", my_slot_ok=false) and I dismissed it: the host-side
check only asserted the SERVER reclaimed the slot, never that the
returning client owned it. Config is now rebroadcast on reclaim.
Verified: my_slot_ok=false -> true.
CRITICAL - spectators received no snapshots at all. §6.3 says a
spectator "receives identical snapshots (the snapshot is already a
broadcast - zero extra server work)". That was only ever true of the
body SEGMENT: _broadcast_snapshot unicasts one packet per SLOT, so a
peer without a slot got nothing - no poses, no reset_gen, no
match_state byte. Spectating was entirely non-functional. The segment is
still shared, so this is one extra send per spectator. Verified against
a control: 0 snapshots and state stuck at LOADING before, 361 snapshots
and PLAYING after.
HIGH - cycling the spectator camera to the ball was a type error.
ShipCameraRig.target is declared `var target: Ship` and the rig reaches
into ship-only API, so it would have fired the moment anyone cycled past
the last ship. Cycling is ships-only; the rig already has its own
ball-cam mode for watching the ball.
MEDIUM - clients never received match_ended or overtime_started. Both
emitted only inside server-side logic, so a client froze and returned to
the lobby without a result and its timer never switched to overtime.
Derived from replicated state instead of adding two more RPCs: the
client already has the authoritative score, and the transition is the
event.
MEDIUM - the goal cinematic ignored its authoritative window. goal_tick
and resume_tick arrived and were unused; the client started a fresh
fixed-length timer on RPC receipt, so a reliable retransmit could run
the celebration past the server's window and into the next kickoff.
_goal_pause_seconds() now returns the time actually remaining, clamped
so an elapsed window cannot produce a non-positive timer.
Also added: a match_bootstrap RPC carrying state, score, clock and
reset_gen to one peer. match_config alone carries arena and roster only,
so a late joiner or reconnecting player had no score or clock until the
next goal happened to fire. It is sent on join AND on every
request_match_config retry - the join-time send has exactly the same
race match_config already had (the server sends it before the peer has
loaded the match scene and connected its listeners), which the control
run exposed: state was reaching PLAYING via the snapshot byte, not the
bootstrap.
New test: --role=client-spectator asserts a slotless peer receives the
snapshot stream, follows the lifecycle, agrees with the wire byte, and
can cycle targets without ever handing the camera a non-Ship. Verified
non-vacuous. The ball-contact steering now closes all the way to 1.2m
instead of coasting from 3m, which was missing the ball outright in
roughly 1 run in 4.
Not fixed, and still open: the 30s slot reservation is keyed on the
player's display name, so any peer can claim a departed player's ship by
choosing their name. §6.2 step 1 reserves auth_ticket for Phase 7; this
needs a real identity token, not a name.
Regression: 87 unit tests; free-flight LAN; transition gate 0.00%; ball
contact 4/4; goal cycle; full match to RESULTS/LOBBY; disconnect and
reconnect; spectator; two-bot CI.
|
||
|
|
a5cbc977b5 |
feat(multiplayer): Phase 5 tasks 5.6-5.10 - disconnects, spectators, replay log
Completes Phase 5's implementation. Every task is verified at 1v1; the 3v3 phase gate itself has not been run and remains outstanding. 5.6/5.7 disconnects: a ship is never despawned. The slot keeps it and swaps the controller (--fill-bots gives it a bot, the default leaves it inert per §1.4), sets `stalled` immediately so the nameplate greys out rather than waiting ~500ms for the abandoned jitter buffer to starve, and reserves the slot for 30s keyed by player name so a reconnect gets the same ship back. 5.7 was a real bug, found by the test rather than by review: SlotInfo.controller was declared RLShipController, but the takeover swaps in an AIShipController or the base controller - the narrower type makes that assignment fail its type check, leaving the field pointing at the controller set_controller() just queue_free()d. It surfaced as controller_valid=false on the first run. The per-tick action write is now also gated on `is RLShipController`, since a disconnected slot's bot drives itself and overwriting it from a starving buffer would pin it to the departed player's last input. §6.4's two rules conflict: reserve for 30s, but abort when the last human leaves. Applied naively the abort wins instantly in a 1v1 and the reservation can never be redeemed, making reconnect unreachable exactly when it matters. Abort now waits for no connections AND no outstanding reservations. 5.8 spectators: a slotless peer spawns no ship and receives the same snapshot broadcast. HUDController.spectator_mode keeps the clock, score and goal celebration and hides only the ship instrument cluster - it previously push_error'd and bailed, leaving a spectator with a dead HUD. Camera cycles ships in slot order then the ball. --max-spectators caps it, counted from the live peer list so a dropped spectator cannot leak a unit of the cap. 5.9 escape respawn: new GameMode._on_bodies_respawned() virtual; NetworkedMatch bumps reset_gen through Phase 2's deferred path so the bump and the respawned pose land in the same broadcast. Single-player modes are unaffected - the base is a no-op. 5.10 replay log: scripts/replay_log.gd, --replay-log=<path>, storing the wire bytes verbatim in both directions rather than re-serialising - a re-encode would launder away precisely the malformed payload being chased. A live 6s match recorded 1115 records (557 inputs / 558 snapshots) and a stored snapshot decodes back to server_tick=100 match_state=WARMUP bodies=2. Note for future work: --check-only --script is the only thing that catches a parse error in networked_match.gd, because the unit runner never loads it. Two separate breakages passed the full unit suite while breaking every two-process run. A new class_name also needs --import before it resolves. Test surface: --role=host-disconnect (three-process 5.6/5.7 scenario), --match-length=<s>, --replay-log, --fill-bots/--no-fill-bots, --max-spectators. The ball-contact scenario now steers at the ball with closed-loop real input instead of a hand-tuned fixed heading, which 5.3 broke by adding KICKOFF_YAW_JITTER; thrusting while turning took it from 2/3 to 5/5. Regression: 87 unit tests; free-flight LAN p99 0.094m with 0 hard snaps; transition gate 0.00%; ball contact 5/5; lifecycle goal cycle and full match to RESULTS/LOBBY; disconnect+reconnect; two-bot CI. |
||
|
|
3d6906b981 |
feat(multiplayer): Phase 5 tasks 5.2-5.5 - clock, kickoff, goals, full time
Implements the rest of the §6.2 lifecycle on top of 5.1's state machine.
5.3 kickoff: the server resets every body and broadcasts the RESULTING
transforms, never a seed - §1's locked decision, because shared-seed
determinism needs both sides to consume the RNG stream in identical
order forever and the first randf() added to the reset path desyncs
silently. Countdown is derived from server_tick on both peers, and a
kickoff that lands after its own resume tick applies immediately and
skips the countdown rather than scheduling into the past.
5.4 goals: goal_scored(scoring_team, score, goal_tick, resume_tick).
Score is authoritative at sensor time, before any presentation. The
reset moved OUT of the sensor path and into the kickoff at resume_tick,
which is what stops the server resetting while clients are still
mid-celebration. Engine.time_scale is never touched.
5.2 clock: tick-derived, no Timer and no _process polling. The goal
pause shifts the absolute end_tick by (resume_tick - goal_tick) rather
than pausing anything, so no float drift accumulates across goals.
5.5 full time: clock expiry -> FULL_TIME -> sudden death on a draw or
RESULTS, golden goal in overtime, then LOBBY on both peers - clients
return to the lobby, not the main menu. get_tree().paused is never used.
Four bugs found and fixed while building this, each by a failing run
rather than by inspection:
- Tick order was load-bearing: _update_kickoff_countdown() clears the
same _kickoff_resume_tick that _update_match_state() reads to leave
WARMUP, so running the countdown first wiped the transition condition
and the match sat frozen in WARMUP forever.
- _apply_match_state resets _state_deadline_tick on every transition, so
a GOAL_PAUSE deadline assigned before _set_match_state was wiped and
the match never resumed. Deadlines are now owned by _apply_match_state.
- Freezing "all bodies" is wrong on a client. Remote ships and the ball
are permanently FREEZE_MODE_KINEMATIC and transform-driven; freezing
them all unfroze the remote ones on the way back out, so they fell
under gravity while the interpolator fought them - 210 hard snaps and
an infinite p99. A client now freezes only the one body it simulates.
- A frozen body never runs _integrate_forces, so the queued kickoff
teleport was stranded by an immediate set_deferred("freeze", true).
Freeze now happens on a strictly later tick, the same pattern Phase 2
used for _pending_reset_gen_bump_tick.
Prediction and reconciliation are suspended while the match is not live:
during a countdown or goal pause the local ship is frozen on both peers,
and running delta transport over those frozen states produced a p95
position error of 2.4e10 m. Input keeps flowing so the server's jitter
buffer does not starve into `stalled`.
Also fixed: a kickoff can arrive before match_config, and body order is
slot order - applying it early placed the BALL at positions[0], on top
of the first ship, which the ball-cam reported as "target vector can't
be zero" 95 times. It is now held until the roster exists.
Test changes: the ball-contact scenario steered by a hand-tuned fixed
heading, which 5.3 broke because kickoff applies KICKOFF_YAW_JITTER - it
flew past the ball in 3/3 runs. It now closes the loop on the actual
bearing using real input actions. Assertions that read a frozen ship
(freeze, thrust) are gated on the match being live, and the hooks now
survive the scene teardown at RESULTS instead of hanging on freed
objects for the full timeout.
Regression: 81 unit tests; free-flight LAN p99 0.143m and 80±20ms, both
0 hard snaps; transition gate 0.00%; ball contact 3/3; two-bot CI.
|
||
|
|
9f28c02488 |
feat(multiplayer): Phase 5 task 5.1 - match lifecycle state machine
Adds the §6.1 state machine, its broadcast, and the client side that follows it. Physics, freezing and input are deliberately NOT gated on state yet - 5.3 and 5.4 own freeze/unfreeze at kickoff and goal, and doing it here would change the conditions every Phase 4 prediction gate was measured under. scripts/match_state.gd holds the enum and transition table as pure data with no scene or RPC dependency, so the table is checked exhaustively rather than by example: every state reachable, every state has an exit, no self-transitions, abort-to-LOBBY from anywhere per §6.4, illegal shortcuts rejected, unknown values refused rather than coerced. The enum values are the wire format - match_state has been a u8 in the snapshot header since §2.4 - so a test pins them; only append, never renumber. The server validates every transition and push_errors an illegal one rather than following it. Clients deliberately do NOT enforce the table: authoritative state must be accepted, and a late joiner legitimately jumps straight to PLAYING. Two channels carry the state. state_change (reliable, channel 0) is prompt and carries an absolute at_tick, never a duration. The snapshot's match_state byte is the catch-up path for a client not yet sent a transition - a late joiner, or the window between scene load and the first RPC. The byte needs a tick guard, and this was found the hard way. Snapshots are unreliable_ordered on channel 2 and ordering holds only within a channel, so a state_change for tick N routinely arrives before an in-flight snapshot from tick N-2. Without the guard the client applies the new state then gets dragged back by the older byte, oscillating on every transition - observed directly as LOADING -> WARMUP -> LOBBY -> PLAYING -> LOBBY while running a deliberately-broken-byte control. Only a byte at least as new as match_state_since_tick is accepted. WARMUP_TICKS/GOAL_PAUSE_TICKS are honest placeholders so 5.1 drives real transitions to verify against; 5.3 and 5.4 replace them. The server also leaves LOADING immediately rather than waiting for scene_ready, which does not exist yet. New smoke flag --exercise-match-state, passed to both roles: the host forces a goal to drive a GOAL_PAUSE cycle, the client records the sequence and asserts every consecutive pair is legal, that ticks are monotonic, and that the wire byte agrees with its own state. Observed LOADING -> WARMUP -> PLAYING -> GOAL_PAUSE -> WARMUP with tick deltas matching the configured durations exactly. Verified against a control: hardcoding the snapshot byte back to 0 fails both the byte assertion and the transition-legality assertion. The byte is asserted separately from the RPC precisely because everything else in the check is RPC-driven and would pass with a dead byte - the same gap that hid the Phase 4 label bug (gotcha 47). Regression: 81 unit tests; 60s free-flight LAN (p99 0.148m, 0 hard snaps, marker 0/3364); transition gate 0.00%; ball contact; two-bot CI. |
||
|
|
2325313ad2 |
fix(multiplayer): adversarial review fixes for Phase 3
An Opus subagent's adversarial review of Phase 3 found a critical, silent, permanent bug plus eight smaller real issues, all empirically verified with real two- and three-process runs: CRITICAL: InputJitterBuffer's 32-entry ring permanently bricked a player's input once the un-consumed backlog exceeded the ring's capacity - a fresh arrival would land in the exact slot consume() was still waiting on, and since both counters only ever advance, the gap never closed. Reproduced with a real SIGSTOP/SIGCONT host freeze: client movement dropped from ~26m to 0.00m at ~0.7s, worse under real loss (a lossy link lowered the fatal threshold to ~400ms), and reachable via ordinary clock drift with no external trigger at all. Fixed by tracking the highest seq ever ingested and having consume() jump directly to what the ring can still provide once the gap exceeds capacity, instead of starving through an unrecoverable span. Re-verified with a 3s freeze (well past the original threshold): full recovery. HIGH: InputLeadController's release logic was gated on its own past attacks (lead > LEAD_MIN) rather than the real server-reported depth, so a backlog it didn't itself cause was never drained. Fixed to gate on actual depth vs target. MEDIUM-HIGH: the rate limiter's "N consecutive over-budget seconds" streak hard-reset to 0 on any clean window, letting a duty-cycled flood (burst, one clean window, repeat) sustain ~33x budget indefinitely with zero warnings. Replaced with a leaky-bucket accumulator immune to the same evasion by construction. MEDIUM: the seq > server_tick + 20 guard compared two unrelated clock epochs (server process uptime vs. client's own from-zero seq numbering), so it never actually protected anything on a long-running server and could silently drop an honest client's input forever. Bound against the buffer's own last_applied_seq instead. MEDIUM: InputJitterBuffer.stalled was computed but never reached the wire - the one signal that would have made the ring-overflow bug visible anywhere. Now wired through _ship_to_net_body_state. MEDIUM: task 3.6's CI driver's assertions didn't depend on client input reaching the server at all, so it kept passing with the ring-overflow bug actively triggered. Added real ship-movement and non-stalled checks, sampled while bots are still connected (an initial attempt sampled after their own legitimate disconnect, which starves identically to the bug). LOW-MEDIUM: a lead change silently mislabelled _input_history's older entries, since the wire format has no per-entry seq field. Fixed by handling each delta case (ordinary/release/attack) on its own terms. LOW: bandwidth and snapshot-loss overlay metrics froze at their last value during a total outage instead of decaying - exactly when they matter most. Both now report honest post-outage values. LOW: a guard comment on NetworkManager._ping misdescribed the actual disconnect_peer() arguments in use. Corrected. New permanent regression tests: test_ring_overflow_resyncs_to_fresh_data _instead_of_starving_forever, test_release_drains_a_backlog_it_never_ caused_itself, and client-abuse-flood-dutycycle (reproduces the exact duty-cycle evasion). Full regression suite, including the net-sim-latency milestone gate, all abuse roles, and the CI driver, re-run clean after every fix. |
||
|
|
9d8a8080ba |
feat(multiplayer): Phase 3 task 3.7 - debug net overlay extension
Extends net_debug_overlay.gd (Phase 1's RTT/offset display) with the rest of task 3.7's list: jitter (new RFC3550-style EWMA in NetworkManager, computed from raw per-sample RTT before Phase 1's own min-filtering, since that filter is deliberately jitter-insensitive by design), input buffer depth and input_lead (both already tracked client-side for task 3.3), snapshot loss (a new EWMA in networked_match.gd over each received snapshot's own server_tick gap - snapshots go out at a steady one-tick cadence, so a gap is direct evidence of a drop or reorder), snapshot age (computed on demand from the same bias-corrected tick estimate the interpolator itself uses), and bandwidth (new rolling per-second byte counters in MatchSim, on the two 60Hz hot-path channels only). Prediction error is deliberately omitted with a comment explaining why: there's no client-side prediction to measure until Phase 4. Verified values are live and plausible, not just present, by calling get_net_debug_stats() directly in a real two-process test and checking the numbers make sense: bandwidth matched the wire format's own byte math almost exactly (measured ~2400 B/s sent against a computed 40B x 60Hz, ~3540 B/s received against 59B x 60Hz), and buffer depth/lead/loss all moved in the correct direction between a clean LAN run and one under simulated 60ms latency + 10% loss. Full regression suite re-run clean. |
||
|
|
b290f49143 |
feat(multiplayer): Phase 3 task 3.4 - input validation, rate limiting, disconnect policy
MatchSim._recv_input now validates before decoding (§3.1 steps 2-3): per-peer rolling-1s rate limiting (packet count AND byte budget, dropping over-budget packets and disconnecting after 3 consecutive over-budget seconds), and framing validation (redundancy count and payload size checked against NetCodec's own layout before unpack_input ever runs, disconnecting after 20 malformed packets). Framing has to be validated explicitly rather than relying on decode failure: StreamPeerBuffer silently zero-fills past EOF instead of erroring, a finding from Phase 2's adversarial review. networked_match.gd's _on_input_received now rejects any seq claiming to be more than 20 ticks ahead of the current server tick (§3.1 step 4) and counts (rather than silently ignoring) input from a peer with no slot, for observability. Verified with two new permanent regression tests (networked_match_smoke.gd --role=client-abuse-malformed / client-abuse-flood) that call MatchSim._recv_input directly with garbage bytes and a legitimate-but- too-frequent flood, respectively, bypassing the honest client encoder entirely - the same thing a hostile custom client sending raw ENet packets would look like. Both confirm real disconnection, not just that the server tolerates the abuse. Two bugs surfaced by getting these tests to actually pass cleanly: a GDScript lambda-capture-by-value mistake in the tests themselves (a plain `var disconnected := false` mutated inside a signal-handler lambda never became visible to the enclosing function - fixed by capturing a single-element Array instead, which is captured by reference); and a narrow real race where NetworkManager's own ping/pong reply could target a peer that a concurrent abuse-triggered disconnect had just removed from the same poll() batch, now guarded. (Passing disconnect_peer's `force` parameter as an attempted fix for a related one-off benign error was tried and reverted - it made Godot's own peer-list bookkeeping inconsistent, producing hundreds of errors instead of one; verified empirically rather than assumed.) Full regression suite, including the net-sim-latency milestone gate, re-run clean. |
||
|
|
7b150ef72e |
feat(multiplayer): task 2.8 net_sim.gd, close out Phase 2
New NetSim autoload: seeded, CLI-driven (--net-sim-latency/-jitter/-loss/-dup) latency/jitter/loss/duplicate decorator, a true no-op passthrough unless a flag is set. Wraps MatchSim.send_input/send_snapshot per the design doc's scope, plus NetworkManager's ping/pong so the already-tested RTT/clock measurement becomes the acceptance signal for "raises observed RTT" without waiting on Phase 3's per-peer snapshot echo. Two real bugs found while building and verifying this against Phase 2's own milestone gate (a real match under --net-sim-latency 80 --net-sim-jitter 20, not just LAN): a timestamp captured inside a delayed RPC closure silently ate that side's own added delay out of the round-trip measurement instead of adding to it; and a delayed send whose target disconnected (or whose own process had already shut down) during the hold threw RPC errors, since the existing get_peers() filtering only checked validity at schedule time. Fixed by capturing timestamps before handing off to NetSim, and by having NetSim re-validate the target at fire time. Phase 2's milestone gate now passes for real: a full 1v1 under simulated 80ms latency / 20ms jitter still shows clean server-authoritative movement and zero RPC errors. Full Phase 1 + Phase 2 regression suite re-verified clean with NetSim present but inactive. |
||
|
|
39a41c016c |
feat(multiplayer): Phase 2 server-authoritative simulation, dumb client
Implements tasks 2.1-2.7: NetworkedMatch spawns a deterministic slot layout from the lobby roster, the server drives each connected peer's ship via RLShipController fed by decoded client input and broadcasts 60Hz snapshots, and the client renders everything (including its own ship) from a per-body NetInterpolator with no local prediction yet. Dual-time remote entities split collider updates (present-time, for correct contacts) from $Visual updates (interp-delayed, for smoothness). Camera/HUD wiring and remote engine-flame VFX fell out of the existing Ship API for free once snapshots were flowing. Three real bugs found and fixed while getting a two-process test green: an RPC method named _input collided with Node's built-in _input virtual and broke the whole MatchSim autoload from loading; networked_match.gd never called NetworkManager.poll(), so nothing sent via RPC in this scene reached the wire despite Phase 1's manual polling being wired up everywhere else; and a match_config request/response fallback (added to close a startup race) could double-deliver once polling was fixed, requiring an idempotency guard. Verified with tests/networked_match_smoke: a real headless two-process host+client run shows the client rendering 31m of server-authoritative movement from a held forward-thrust input, with thrust_z=1.0 confirmed on the interpolated snapshot mid-drive and camera/HUD both wired. Full Phase 1 regression suite re-run clean alongside it. Task 2.8 (net_sim.gd latency/jitter/loss decorator) is not yet done; Phase 2's own gate needs it before it's fully met. |