mirror of
https://github.com/jcreek/AGameOfThronesTheBoardGame-12PlayerVersion.git
synced 2026-07-13 02:53:48 +00:00
Josh Creek
73 lines
3.4 KiB
Markdown
73 lines
3.4 KiB
Markdown
# Assembly Instructions
|
|
|
|
## 3D Printing
|
|
|
|
I printed the parts myself using a Bamboo Labs P1S 3D printer. I recommend using PLA filament for ease of printing and good detail. If you don't have a 3D printer, you can use a 3D printing service to have the parts printed and shipped to you. I've never used one so can't make recommendations. The `.stl` files are what you will need to send them.
|
|
|
|
### Units
|
|
|
|
Each house needs these printed in their colour (see [the README](./README.md#general-information) for the colours).
|
|
|
|
- 10 [footmen](./3d-printing/units/footman.stl)
|
|
- 5 [knights](./3d-printing/units/knight.stl)
|
|
- 6 [ships](./3d-printing/units/ship.stl)
|
|
- 2 [siege engines](./3d-printing/units/siege-engine.stl)
|
|
|
|
### Power Tokens
|
|
|
|
Each house needs 20 printed in their colour (see [the README](./README.md#general-information) for the colours).
|
|
|
|
- 20 [power tokens](./3d-printing/other/power-token.stl)
|
|
|
|
### Influence Tokens
|
|
|
|
There are tokens needed, three for each House, to represent their standing on the tracks. I have created a simple design for each track, with a symbol embossed into it:
|
|
|
|
1. [Influence Token 1 (Crown)](./3d-printing/influence/crown-token.stl)
|
|
2. [Influence Token 2 (Sword)](./3d-printing/influence/sword-token.stl)
|
|
3. [Influence Token 3 (Raven)](./3d-printing/influence/raven-token.stl)
|
|
|
|
You will need to print one of each, per house, in that house's colour (see [the README](./README.md#general-information) for the colours). That's a total of 12 per token, 36 overall.
|
|
|
|
### Supply Tokens
|
|
|
|
Each house needs 1 printed in their colour (see [the README](./README.md#general-information) for the colours).
|
|
|
|
- 1 [supply token](./3d-printing/other/supply-token.stl)
|
|
|
|
### Victory Point Tokens
|
|
|
|
Each house needs 1 printed in their colour (see [the README](./README.md#general-information) for the colours).
|
|
|
|
- 1 [victory point token](./3d-printing/other/victory-point-token.stl)
|
|
|
|
### Order Tokens
|
|
|
|
These have been provided for printing. My chosen approach was to 3d print blank tokens in the colour of each house, and then use printed stickers to add the symbols to one side.
|
|
|
|
Each house needs 15 printed in their colour (see [the README](./README.md#general-information) for the colours).
|
|
|
|
- 15 [Order Token](./3d-printing/other/order-token.stl)
|
|
- 1 set of [Order Token Symbols](./printing/Order-Tokens-Faces.jpg) onto sticker paper, then cut out
|
|
|
|
### Influence Tracks
|
|
|
|
By changing the board the game is played on we lose the 'Influence' section, which needed updating to work with 12 players anyway. I have created three models based on the designs of the original creator, one for each of the Influence tracks.
|
|
|
|
1. [Influence Track 1](./3d-printing/influence/board-1.stl)
|
|
2. [Influence Track 2](./3d-printing/influence/board-2.stl)
|
|
3. [Influence Track 3](./3d-printing/influence/board-3.stl)
|
|
|
|
You will need to print one of each track.
|
|
|
|
### Board
|
|
|
|
You will need to print the custom board design, which has been split into four quadrants for easier printing. Each quadrant should be printed at the highest quality possible to ensure the best detail and appearance. Ideally print it onto A0 size paper or card.
|
|
|
|
The quadrants are available in a [PDF](./printing/board/map_quadrants_A0.pdf) or as individual PNG files:
|
|
|
|
1. [Top Left](./printing/board/part1_top_left.png)
|
|
2. [Top Right](./printing/board/part1_top_right.png)
|
|
3. [Bottom Left](./printing/board/part1_bottom_left.png)
|
|
4. [Bottom Right](./printing/board/part1_bottom_right.png)
|